With its scissor lift, the N20 C LX order picker is a powerful and ergonomic order picking solution and can lift and transport up to 2.0 tonnes. During order picking, the operator comfortably lifts the forks to the optimum height to avoid unnecessary stress. This means that two Euro pallets can be filled at the same time to protect the back. The operator's platform can also be lifted as an option for occasional order picking on the second level. The construction of the mast and chassis prevents crushing injuries. In addition, the operator's platform offers good all-round visibility and can also be equipped with a panoramic mirror.
Series 4590Linde N20 C LX Electric Order Picker
The N20 C LX enables the fast and safe order picking of heavy or long goods.
The operator platform can be lifted to allow occasional order picking at the first and second rack levels up to 2.8 metres picking height.
The Linde FleetFOCUS fleet management solution allows, among other things, for the usage of trucks to be analysed in order to optimise the servicing or utilisation of the fleet.
The two LED headlights are located at the front and have a high brightness. They are waterproof and dustproof.
The pneumatically-cushioned construction reduces vibrations caused by uneven road surfaces.
An additional protection for operator and load is the load backrest, which can be adapted to the height of the load.
The Linde BlueSpot™ is an optical warning signal solution that emits a light signal to indicate that the truck is approaching.
The innovative Lithium-ION battery, trucks can be recharged in a much shorter time and intermediately charged during operation.
There are push buttons on both sides of the vehicle, which the operator uses to operate the order picker from the outside, walking alongside at the same time. To avoid any safety risk to feet when going backwards, the trucks are equipped with a rear foot protection feature on both sides of the chassis.
A large mirror at the front of the vehicle provides a good all-round view and thus increases safety for the operator, load and pedestrians.
The lateral battery removal by means of roller bearings enables a quick change, especially for use in multi-shift applications.
Whether driving errors, uneven surfaces or improper vehicle use, a shock sensor registers shocks. The evaluation of the data via the fleet management software provides information on the cause of damage and accidents.
When the fork is fully loaded, the lowering speed is reduced. This provides additional protection against damage to the goods.
Access control via the connect fleet management system ensures that vehicles are only used by authorised persons. The operator must identify him or herself with a PIN or RFID card before starting.