Products
Services
Solutions
About Linde
The Linde V10 vertical order picker has been designed for order picking tasks at the first and second racking levels, as well as occasional working up to a height of 6.35 metres. The cab and all the control elements meet all the ergonomic requirements for effortless working.
The truck is available with a walk-on loading platform or auxiliary lift. Various lift motors, and chassis, cab and mast variants can be configured in almost any combination. The equipment can therefore be adapted to individual requirements and achieve a high level of picking frequency performance. It can be used with mechanical or inductive guidance or be freely movable — in each case with a maximum load of 1.0 tonne.
Lift capacity 1.0 tonne
Engine type Electric
Series 5021Linde V10 Electric Order Picker
The signal can be heard when the order picker is moving, giving a warning to pedestrians and other vehicles.
There is the option for the vehicle controller to monitor various sensors on the control panel, side barriers and dead-man’s switch, and to give an acoustic warning if the signals might indicate operating errors.
The control panel can either be fitted only on the load end or on both the load and mast end. The mast end control panel follows the same control logic as the load end panel.
Items such as terminals, scanners, clip-boards, writing supports or individual fixtures can be fitted. The attachment bars are mounted on the left and right-hand side of the mast as well as on the load end on the overhead guard.
Lane warning device Linde BlueSpot™ enhances safety during operation as the LED spot makes the forklift noiselessly visible in both travel directions.
The ergonomically designed ‘Lean-on Ergoroll’ padding has three adjustment positions, and is used when the truck is operated from the load end. The operator can rest against it during travel.
The trucks have sensors that detect the guide wire in the floor, enabling the truck to be steered safely along the passageway.
The system provides rapid turnaround and increased safety by variably adjusting the speed of the truck dependent upon the steering angle and the lift height.
If the operator leans on the barrier, it folds out to the side. This enables them to reach the racking better, making the order picking easier.
The truck is fitted with a 12V/50W connection as well as loud speakers and an antenna in the cab.
The equipment package includes a large rear-view mirror as well as sideways working lights to illuminate the working surroundings in the racking. The package can be supplemented with a fan system to cool the operator when working at height beneath the ceiling in hot weather.
Locate us
Contact us
Search 
Order Picker
