Products
Services
Solutions
About Linde
The N16 Li order picker from Linde Material Handling enables a particularly high picking output. The operator platform is positioned in front of the battery giving the driver a good view of the warehouse environment. Even in narrow aisles, they can quickly manoeuvre the truck into the desired position thanks to the small turning circle.
With the aid of the lift, the forks can be raised to an ergonomic height of up to 790mm for loading. The optional Autolift helps the truck automatically lower the forks in proportion to the increasing height of the load. This eliminates the need for manual operation of the lift, and the operator always picks orders at the optimum height without unnecessary interruption. The entire operator platform is spring-loaded and absorbs vibrations and shocks during transport.
Lift capacity 1.6 tonne
Engine type Electric
Series 1115Linde N16 Li Electric Order Picker
The Linde FleetFOCUS fleet management solution allows, among other things, for the usage of trucks to be analysed in order to optimise the servicing or utilisation of the fleet.
The LED light is located in the front and has a high level of brightness. It is water and dust proof.
An additional protection for operator and load is the load backrest, which can be adapted to the height of the load.
The Linde BlueSpot™ is an optical warning solution that emits a light signal to indicate that the truck is approaching.
The innovative lithium-ion technology means that the batteries can be fully recharged in around 1.1 hours at room temperature.
On both sides of the forklift truck there are push buttons on the lift mast. The operator uses them to operate the order picker from the outside and walks alongside at the same time.
The lateral battery removal by means of roller bearings enables a quick change, especially for use in multi-shift applications.
The rubber bumper reduces shocks in the event of a collision, thus protecting the operator, forklift and infrastructure such as racking.
Whether operating errors, uneven surfaces or improper forklift use – a shock sensor registers shocks. The evaluation of the data via the fleet management software provides information on the cause of damage and accidents.
Access control via the connect fleet management system ensures that forklift trucks are only used by authorised persons. The operators must identify themselves by PIN or RFID card before the forklift truck is started.
Locate us
Contact us
Search 
Order Picker
